Rising Film Evaporator
  • Home
  • Technologies
  • Rising Film Evaporator
Rising Film Evaporator

A rising film or vertical long tube evaporator is a type of evaporator that is essentially a vertical shell and tube heat exchanger. The liquid being evaporated is fed from the bottom into long tubes and heated with steam condensing on the outside of the tube from the shell side.

This is to produces steam and vapour within the tube bringing the liquid inside to a boil. The vapour produced then presses the liquid against the walls of the tubes and causes the ascending force of this liquid. As more vapour is formed, the center of the tube will have a higher velocity which forces the remaining liquid against the tube wall forming a thin film which moves upwards. This phenomenon of the rising film gives the evaporator its name.

Features

  • Ideal for liquids which attain high viscosity and tend to foul.
  • Suitable for high temperature application.
  • Better steam economy as compared to falling film evaporator.
  • Low capital cost.
  • Versatility to change to forced circulation type evaporator if product behavior is likely to change.
  • Easy removal of deposits can be achieved by increasing feed rate or reducing steam rate.
  • Special designs of vapor separators for foaming products are available.

Applications

  • Chemical Industry
  • Effluent Treatment Plants
  • Polymers
  • Food products
  • Pharmaceuticals
Previous Product
Falling Film Evaporator
Next Product
Agitated Thin Film Dryer